There was a time in Buffalo
when we were producing revolutionary products and ideas that helped fuel the
growth of America. The grain elevator by Joseph Dart and the eventual evolution
of the building type that would go on to inspire architects of the Modernism
movement; the forerunner of the modern day air conditioning system developed by
Carrier; the windshield wiper, the pacemaker, more recently, a new cancer
vaccine and so much more. Although we have not been able to match the strength
of those days in last few decades, we are still producing some revolutionary
ideas and inventions.
Modular
Radiant Technologies, LLC (MRT) is one example of a Buffalo business in the
new century that is creating a unique and revolutionary product. MRT produces a
radiant heat product that is far superior to traditional forced air and other
radiant heat systems. The product was invented by the company’s CEO, Gary
Hydock.
MRT is based on the east
side at 980 Northampton Street, their product is made from post consumer
recycled materials, and the majority of the components required to create their
product are sourced locally. They currently have 90 projects under their belt
in the seven counties surrounding Buffalo.
In a traditional radiant
heating system, the pex tubing is put down and secured and then gypsum concrete
is poured over the entire floor plate. The problem with that model includes
moisture release into the existing structure (future mold issues), the weight
of the wet gypcrete (22 lbs. sq. ft. wet, 15 lbs. sq. ft. dry) and that if something breaks or needs to be serviced, a
jackhammer would be required to remove the gypcrete and repair the problem. The
MRT system can be easily serviced if anything goes wrong because of its
modularity but so far they have a 0% failure rate. Additionally, the weight of
the product Modular Radiant Technologies produces is only 8 pounds per square and
requires no structural modification to the building to install it.
When compared to traditional
forced air systems, the Modular Radiant system results in better indoor air
quality, a higher level of comfort, no dust, and is typically less than half the
cost to operate of a forced air system. Now combine that the high efficiency
boiler they offer and it’s a no brainer to go with their system for a new build
or adaptive reuse project. The boiler they offer can operate on nine different energy
sources including alternative energy like windmill or solar or geothermal.
The plastic trays that form
the base of their panel is made from 100% post consumer recycled plastic that
is produced in Holland, NY and was designed by the Buffalo Polymer. The cement comes
from Holcim Cement on Route 5 and the Norlite, which is a lightweight
aggregate, comes from Albany. The end product often incorporates Styrofoam and
carbon activated material as well as other recycled materials which would
typically end up in a landfill instead of being recycled and repurposed.
The rehabilitation of the
bed and breakfast on Wadsworth that was recently
profiled on Buffalo Rising included the MRT product in their design. At the
peak of the winter season, the owner had a gas bill of about $1100 a month,
which on average floated around $650. After installing the radiant heat system
by MRT, the average monthly bills dropped to $288.
Hopefully we will begin to
see more projects incorporating green technologies such as this. In Europe, 87%
of their building stock is heated with a radiant heat system, but less than 3%
of all buildings in America utilize the system. We rely on traditional forced
air more often than not. Using the MRT products means a better indoor
environment, utilities savings, and supporting a local company that sources
much of their components from other local and New York State companies.
Entry Image: Modular Radiant installation before floor covering has been added
